Thermodynamics Research Today is a free monthly online journal that collates and summarizes the latest research about Thermodynamics, including details on enthalpy, entropy, energy transitions.

Heavy metal adsorption by modified oak sawdust: thermodynamics and kinetics.

Argun ME, Dursun S, Ozdemir C, Karatas M

Department of Environmental Engineering, Engineering and Architecture Faculty, Selçuk University, 42031 Selçuklu-Konya, Turkey. argun@selcuk.edu.tr

This paper describes the adsorption of heavy metal ions from aqueous solutions by oak (Quercus coccifera) sawdust modified by means of HCl treatment. Our study tested the removal of three heavy metals: Cu, Ni, and Cr. The optimum shaking speed, adsorbent mass, contact time, and pH were determined, and adsorption isotherms were obtained using concentrations of the metal ions ranging from 0.1 to 100mgL(-1). The adsorption process follows pseudo-second-order reaction kinetics, as well as Langmuir and D-R adsorption isotherms. The paper discusses the thermodynamic parameters of the adsorption (the Gibbs free energy, entropy, and enthalpy). Our results demonstrate that the adsorption process was spontaneous and endothermic under natural conditions. The maximum removal efficiencies were 93% for Cu(II) at pH 4, 82% for Ni(II) at pH 8, and 84% for Cr(VI) at pH 3.

Published 20 February 2007 in J Hazard Mater, 141(1): 77-85.
Full-text of this article is available online (may require subscription).

© 2005-2008 Thermodynamics Research Today. All Rights Reserved.