Thermodynamics Research Today is a free monthly online journal that collates and summarizes the latest research about Thermodynamics, including details on enthalpy, entropy, energy transitions.

Thermodynamic and kinetic characterization of polymorphic transformation of famotidine during grinding.

Lin SY, Cheng WT, Wang SL

Department of Medical Research & Education, Taipei Veterans General Hospital, Taipei, Taiwan, ROC. sylin@vghtpe.gov.tw

Two polymorphs of famotidine were prepared by recrystallization from acetonitrile for form A and methanol for form B, respectively. The effect of grinding process on the polymorphic transformation of famotidine was investigated. Each famotidine sample ground for various grinding times in a ceramic mortar was determined by differential scanning calorimetry (DSC), conventional and thermal Fourier transform infrared (FT-IR) microspectroscopy. The results indicate that the raw material of famotidine was proved to be a form B. A unique IR absorption band at 3505 cm(-1) for famotidine form B gradually decreased its intensity with the grinding time, while two newer IR absorption bands at 3451 and 1671 cm(-1) for famotidine form A slowly appeared. The peak intensity ratio of 3451/350 5 cm(-1) was linearly (r=0.9901) increased with the grinding time, suggesting that the grinding process could induce the polymorphic transformation of famotidine from form B to form A by a zero-order process. The DSC endothermic peaks also confirmed this polymorphic transformation from famotidine form B (167 degrees C, DeltaH: 165J/g) to famotidine form A (174 degrees C, DeltaH: 148J/g) in which the values of enthalpy were linearly reduced with the increase of grinding time (r=0.9943). The phase transition temperature of the different ground famotidine samples could be easily and only evidenced by using thermal FT-IR microspectroscopy, rather than by DSC analysis. These phase transition temperatures of the famotidine form B ground for 5-20 min quickly reduced from 144 to 134 degrees C and maintained a constant at 134 degrees C even after 20-30 min grinding. The grinding process not only decreased the crystallinity of famotidine form B but also reduced the particle size of famotidine form B, resulting in easy induction of the polymorphic transformation of famotidine from form B to form A in ground famotidine sample.

Published 4 July 2006 in Int J Pharm, 318(1): 86-91.
Full-text of this article is available online (may require subscription).

© 2005-2008 Thermodynamics Research Today. All Rights Reserved.